Results 1351-1400 of 3615 (3521 ASCL, 94 submitted)

[ascl:2007.021]
JB2008: Empirical Thermospheric Density Model

JB2008 (Jacchia-Bowman 2008) is an empirical thermospheric density model developed as an improved revision to the Jacchia-Bowman 2006 model, based on Jacchia’s diffusion equations. Driving solar indices are computed from on-orbit sensor data, which are used for the solar irradiances in the extreme through far ultraviolet, including x-ray and Lyman-α wavelengths. Exospheric temperature equations are developed to represent the thermospheric EUV and FUV heating. Semiannual density equations based on multiple 81-day average solar indices are used to represent the variations in the semiannual density cycle that result from EUV heating, and geomagnetic storm effects are modeled using the Dst index as the driver of global density changes.

[ascl:2007.020]
pygwinc: Gravitational Wave Interferometer Noise Calculator

pygwinc processes and plots noise budgets for ground-based gravitational wave detectors. Its primary feature is a collection of mostly analytic noise calculation functions for various sources of noise affecting detectors, including quantum and seismic noise, mirror coating and substrate thermal noise, suspension fiber thermal noise, and residual gas noise. It is also a generalized noise budgeting tool that allows users to create arbitrary noise budgets for any experiment, not just ground-based GW detectors, using measured or analytically calculated data.

[ascl:2007.019]
TROVE: Theoretical ROVibrational Energies

TROVE (Theoretical ROVibrational Energies) performs variational calculations of rovibrational energies for general polyatomic molecules of arbitrary structure in isolated electronic states. The software numerically constructs the kinetic energy operator, which is represented as an expansion in terms of internal coordinates. The code is self-contained, requiring no analytical pre-derivation of the kinetic energy operator. TROVE is also general and can be used with any internal coordinates.

[ascl:2007.018]
OSPEX: Object Spectral Executive

OSPEX (Object Spectral Executive) is an object-oriented interface for X-ray spectral analysis of solar data. The next generation of SPEX (ascl:2007.017), it reads and displays input data, selects and subtracts background, selects time intervals of interest, selects a combination of photon flux model components to describe the data, and fits those components to the spectrum in each time interval selected. During the fitting process, the response matrix is used to convert the photon model to the model counts to compare with the input count data. The resulting time-ordered fit parameters are stored and can be displayed and analyzed with OSPEX. The entire OSPEX session can be saved in the form of a script and the fit results stored in the form of a FITS file. Part of the SolarSoft (ascl:1208.013) package, OSPEX works with any type of data structured in the form of time-ordered count spectra; RHESSI, Fermi, SOXS, MESSENGER, Yohkoh, SMM, and SMART data analysis have all been implemented in OSPEX.

[ascl:2007.017]
SPEX: Spectral Executive

SPEX provides a uniform interface suitable for the X-ray spectral analysis of a number of solar (or other) instruments in the X and Gamma Ray energy ranges. Part of the SolarSoft (ascl:1208.013) library, this package is suitable for any datastream which can be placed in the form of response vs interval where the response is usually a counting rate (spectrum) and the interval is normally an accumulation over time. Together with an algorithm which can be used to relate a model input spectrum to the observed response, generally a response matrix, the dataset is amenable to analysis with this package. Currently the data from a large number of instruments, including SMM (HXRBS, GRS Gamma, GRS X1, and GRS X2), Yohkoh (HXT, HXS, GRS, and SXT,) CGRO (BATSE SPEC and BATSE LAD), WIND (TGRS), HIREX, and NEAR (PIN). SPEX's next generation software is available in OSPEX (ascl:2007.018), an object-oriented package that is also part of and dependent on SolarSoft.

[ascl:2007.016]
ReadPDS: Visualization tools for PDS4 data

ReadPDS reads in and visualizes data from the Planetary Data System in PDS4 format. Tools are available in Python as PDS4Viewer and in IDL as PDS4-IDL. These tools support PDS4 data, including images, spectra, and arrays and provide multiple views of the data, including summary, image, plot, and table views in addition to easy access to metadata such as structure labels and spectral characteristics.

[ascl:2007.015]
MAGI: Initial-condition generator for galactic N-body simulations

MAGI (MAny-component Galaxy Initializer) generates initial conditions for numerical simulations of galaxies that resemble observed galaxies and are dynamically stable for time-scales longer than their characteristic dynamical times, taking into account galaxy bulges, discs, and haloes. MAGI adopts a distribution-function-based method and supports various kinds of density models, including custom-tabulated inputs and the presence of more than one disc, and is fast and easy to use.

[ascl:2007.014]
PARS: Paint the Atmospheres of Rotating Stars

PARS (Paint the Atmospheres of Rotating Stars) quickly computes magnitudes and spectra of rotating stellar models. It uses the star's mass, equatorial radius, rotational speed, luminosity, and inclination as input; the models incorporate Roche mass distribution (where all mass is at the center of the star), solid body rotation, and collinearity of effective gravity and energy flux.

[ascl:2007.013]
wdtools: Spectroscopic analysis of white dwarfs

wdtools characterizes the atmospheric parameters of white dwarfs using spectroscopic data. The flagship class is the generative fitting pipeline (GFP), which fits ab initio theoretical models to observed spectra in a Bayesian framework using high-speed neural networks to interpolate synthetic spectra.

[ascl:2007.012]
Line-Stacker: Spectral lines stacking

Line-Stacker stacks both 3D cubes or already extracted spectra and is an extension of Stacker (ascl:1912.019). It is an ensemble of both CASA tasks and native python tasks. Line-Stacker supports image stacking and some additional tools, allowing further analysis of the stack product, are also included in the module.

[ascl:2007.011]
FleCSPH: Parallel and distributed SPH implementation based on the FleCSI

Loiseau, Julien; Lim, Hyun; Kaltenborn, Mark Alexander; Korobkin, Oleg; Mauney, Christopher M.; Sagert, Irina; Even, Wesley P.; Bergen, Benjamin K.

FleCSPH is a multi-physics compact application that exercises FleCSI parallel data structures for tree-based particle methods. In particular, the software implements a smoothed-particle hydrodynamics (SPH) solver for the solution of Lagrangian problems in astrophysics and cosmology. FleCSPH includes support for gravitational forces using the fast multipole method (FMM). Particle affinity and gravitation is handled using the parallel implementation of the octree data structure provided by FleCSI.

[ascl:2007.010]
DarkHistory: Modified cosmic ionization and thermal histories calculator

DarkHistory calculates the global temperature and ionization history of the universe given an exotic source of energy injection, such as dark matter annihilation or decay. The software simultaneously solves for the evolution of the free electron fraction and gas temperature, and for the cooling of annihilation/decay products and the secondary particles produced in the process. Consequently, we can self-consistently include the effects of both astrophysical and exotic sources of heating and ionization, and automatically take into account backreaction, where modifications to the ionization/temperature history in turn modify the energy-loss processes for injected particles.

[ascl:2007.009]
polyMV: Multipolar coefficients converter

polyMV converts multipolar coefficients (alms in healpix order) into Multipole Vectors (MVs) and also Fréchet Vectors (FVs) given a specific multipole. The code uses MPSolve (ascl:2007.008) and is order of magnitudes faster than other existing public codes at high multipoles.

[ascl:2007.008]
MPSolve: Multiprecision Polynomial SOLVEr

MPSolve (Multiprecision Polynomial SOLVEr) provides an easy-to-use universal blackbox for solving polynomials and secular equations. Its features include arbitrary precision approximation and guaranteed inclusion radii for the results. It can exploit polynomial structures, taking advantage of sparsity as well as coefficients in a particular domain (*i.e.*, integers or rationals), and can be specialized for specific classes of polynomials.

[ascl:2007.007]
PSRVoid: Statistical suite for folded pulsar data

PSRVoid performs RFI excision, flux calibration and timing of folded pulsar data. RFI excision is administered via both traditional and multi-layered deep learning neural network algorithms. The software offers full neural network control (over training set creation and manipulation and network parameters). PSRVoid also contains useful data miners for the ATNF, a multitude of plotting tools, as well as many useful pulsar processing macros such as space velocity simulators and Tempo2 (ascl:1210.015) wrappers.

[ascl:2007.006]
PoPE: Population Profile Estimator

PoPE (Population Profile Estimator) analyzes spatial distribution or internal spatial structure problems of samples of astronomical systems. This population-based Bayesian inference model uses the conditional statistics of spatial profile of multiple observables assuming the individual observations are measured with errors of varying magnitude. Assuming the conditional statistics of the observables can be described with a multivariate normal distribution, the model reduces to the conditional average profile and conditional covariance between all observables. The method consists of two steps: (1) reconstructing the average profile using non-parametric regression with Gaussian Processes and (2) estimating the property profiles covariance given a set of independent variable. PoPE is computationally efficient and capable of inferring average profiles of a population from noisy measurements without stacking and binning nor parameterizing the shape of the average profile.

[ascl:2007.005]
PeTar: ParticlE Tree & particle-particle & Algorithmic Regularization code for simulating massive star clusters

The N-body code PETAR (ParticlE Tree & particle-particle & Algorithmic Regularization) combines the methods of Barnes-Hut tree, Hermite integrator and slow-down algorithmic regularization (SDAR). It accurately handles an arbitrary fraction of multiple systems (*e.g.* binaries, triples) while keeping a high performance by using the hybrid parallelization methods with MPI, OpenMP, SIMD instructions and GPU. PETAR has very good agreement with NBODY6++GPU results on the long-term evolution of the global structure, binary orbits and escapers and is significantly faster when used on a highly configured GPU desktop computer. PETAR scales well when the number of cores increase on the Cray XC50 supercomputer, allowing a solution to the ten million-body problem which covers the region of ultra compact dwarfs and nuclear star clusters.

[ascl:2007.004]
spex_to_xspec: Convert SPEX output to XSPEC input

spex_to_xspec takes the output from the collisional ionisation equilibrium model in the SPEX spectral modelling and fitting package (ascl:1308.014), and converts it into a form usable by the XSPEC spectral fitting package (ascl:9910.005). For a list of temperatures it computes the line strengths and continuum spectra using SPEX. These are collated and written into an APEC-format table model which can be loaded into Xspec. By allowing SPEX models to be loaded into XSPEC, the program allows easy comparison between the results of the SPEX and APEC codes.

[ascl:2007.003]
SPARTA: Subhalo and PARticle Trajectory Analysis

SPARTA is a post-processing framework for particle-based cosmological simulations. The code is written in pure, MPI-parallelized C and is optimized for high performance. The main purpose of SPARTA is to understand the formation of structure in a dynamical sense, namely by analyzing the trajectories (or orbits) of dark matter particles around their halos. Within this framework, the user can add analysis modules that operate on individual trajectories or entire halos. The initial goal of SPARTA was to compute the splashback radius of halos, but numerous other applications have been implemented as well, including spherical overdensity calculations and tracking subhalos via their constituent particles.

[ascl:2007.002]
hierArc: Hierarchical analysis of strong gravitational lenses

hierArc hierarchically infers strong lensing mass density profiles and the cosmological parameters, in particular the Hubble constant. The software supports lenses with imaging data and kinematics, and optionally time delays. The kinematics modeling is performed in conjunction with lenstronomy (ascl:1804.012).

[ascl:2007.001]
GProtation: Measuring stellar rotation periods with Gaussian processes

GProtation measures stellar rotation periods with Gaussian processes.

This code is no longer being maintained. Please consider using celerite (ascl:1709.008) or exoplanet (ascl:1910.005) instead.

[submitted]
SoFiAX

SoFiAX is a web-based platform to merge and interact with the results of parallel execution of SoFiA HI source finding software [ascl:1412.001] and other steps of processing ASKAP Wallaby HI survey data.

[ascl:2006.023]
deepSIP: deep learning of Supernova Ia Parameters

deepSIP (deep learning of Supernova Ia Parameters) measures the phase and light-curve shape of a Type Ia Supernova (SN Ia) from an optical spectrum. The package contains a set of three trained Convolutional Neural Networks (CNNs) for the aforementioned purposes, but tools for preprocessing spectra, modifying the neural architecture, training models, and sweeping through hyperparameters are also included.

[ascl:2006.022]
MCSED: Spectral energy distribution fitting package for galactic systems

MCSED models the optical, near-infrared and infrared spectral energy distribution (SED) of galactic systems. Its modularity and options make it flexible and able to address the varying physical properties of galaxies over cosmic time and environment and adjust to changes in understanding of stellar evolution, the details of mass loss, and the products of binary evolution through substitution or addition of new datasets or algorithms. MCSED is built to fit a galaxy’s full SED, from the far-UV to the far-IR. Among other physical processes, it can model continuum emission from stars, continuum and line-emission from ionized gas, attenuation from dust, and mid- and far-IR emission from dust and polycyclic aromatic hydrocarbons (PAHs). MCSED performs its calculations by creating a complex stellar population (CSP) out of a linear combination of simple-stellar populations (SSPs) using an efficient Markov Chain Monte Carlo algorithm. It is very quick, and takes advantage of parallel processing.

[ascl:2006.021]
FAMED: Extraction and mode identification of oscillation frequencies for solar-like pulsators

The FAMED (Fast and AutoMated pEak bagging with Diamonds) pipeline is a multi-platform parallelized software that performs and automates extraction and mode identification of oscillation frequencies for solar-like pulsators. The pipeline can be applied to a large variety of stars, ranging from hot F-type main sequence, up to stars evolving along the red giant branch, settled into the core-Helium-burning main sequence, and even evolved beyond towards the early asymptotic giant branch. FAMED is based on DIAMONDS (ascl:1410.001), a Bayesian parameter estimation and model comparison by means of the nested sampling Monte Carlo (NSMC) algorithm.

[ascl:2006.020]
GenetIC: Initial conditions generator for cosmological simulations

GenetIC generates initial conditions for cosmological simulations, especially for zoom simulations of galaxies. It provides support for "genetic modifications" of specific attributes of simulations to allow study of the impact of such modifications on the outcomes; the code can also produce constrained initial conditions.

[ascl:2006.019]
TATOO: Tidal-chronology Age TOOl

TATOO (Tidal-chronology Age TOOl) estimates the age of massive close-in planetary systems, even those subject to tidal spin-up, using the systems' observed properties: the mass of the planet and the star, stellar rotational, and planetary orbital periods. It can also be used as a classical gyrochronological tool and offers first order correction of the impact of tidal interaction on gyrochronology.

[ascl:2006.018]
Powderday: Dust radiative transfer package

Narayanan, Desika; Turk, Matthew J.; Robitaille, Thomas; Kelly, Ashley J.; Connor McClellan, B.; Sharma, Ray S.; Garg, Prerak; Abruzzo, Matthew; Choi, Ena; Conroy, Charlie; Johnson, Benjamin D.; Kimock, Benjamin; Li, Qi; Lovell, Christopher C.; Lower, Sidney; Privon, George C.; Roberts, Jonathan; Sethuram, Snigdaa; Snyder, Gregory F.; Thompson, Robert; Wise, John H.

The dust radiative transfer software Powderday interfaces with galaxy formation simulations to produce spectral energy distributions and images. The code uses fsps (ascl:1010.043) and its Python bindings python-fsps for stellar SEDs, Hyperion (ascl:1207.004) for dust radiative transfer, and works with a variety of packages, including Arepo (ascl:1909.010), Changa (ascl:1105.005), Gasoline (ascl:1710.019), and Gizmo (ascl:1410.003); threaded throughout is yt (ascl:1011.022).

[ascl:2006.017]
AstroCatR: Time series reconstruction of large-scale astronomical catalogs

AstroCatR reconstructs celestial objects' time series data for astronomical catalogs. It is a command-line program running on the Linux platform and is implemented in C and Python; AstroCatR's capabilities are based on specialized sky partitioning and MPI parallel programming. The package contains three parts: ETL (extract-transform-load) pre-processing, TS-matching calculation, and time series data retrieval. Once the user obtains the original catalogs, running ETL pre-processing generates a sky zoning file. The TS-matching module marks celestial objects, and finally, running the Query program searches celestial objects from the time series datasets which matched with the target.

[ascl:2006.016]
SPISEA: Stellar Population Interface for Stellar Evolution and Atmospheres

SPISEA (Stellar Population Interface for Stellar Evolution and Atmospheres) generates single-age, single-metallicity populations (*i.e.*, star clusters). The software (formerly called PyPopStar) provides control over different parameters, including cluster characteristics (age, metallicity, mass, distance); total extinction, differential extinction, and extinction law; stellar evolution and atmosphere models; stellar multiplicity and Initial Mass Function; and photometric filters. SPISEA can be used to create a cluster isochrone in many filters using different stellar models, generate a star cluster at any age with an unusual IMF and unresolved multiplicity, and make a spectrum of a star cluster in integrated light.

[ascl:2006.015]
ARCHI: Add-on pipeline module for background star analysis from CHEOPS data

Silva, André M.; Sousa, Sérgio G.; Santos, Nuno; Demangeon, Olivier D. S.; Silva, Pedro; Hoyer, S.; Guterman, P.; Deleuil, Magali; Ehrenreich, David

The CHaracterizing ExOPlanet Satellite (CHEOPS) mission pipeline provides photometry for the central star in its field; ARCHI takes in data from the CHEOPS mission pipeline, analyzes the background stars, and determines the photometry of these stars, thus creating the possibility of producing photometric time-series of several close-by targets at once, in addition to using different stars in the image to calibrate systematic errors.

[ascl:2006.014]
CARACal: Containerized Automated Radio Astronomy Calibration pipeline

Józsa, Gyula I. G.; White, Sarah V.; Thorat, Kshitij; Smirnov, Oleg M.; Serra, Paolo; Ramatsoku, Mpati; Ramaila, Athanaseus J. T.; Perkins, Simon J.; Molnár, Dániel Cs.; Makhathini, Sphesihle; Maccagni, Filippo M.; Kleiner, Dane; Kamphuis, Peter; Hugo, Benjamin V.; de Blok, W. J. G.; Andati, Lexy A. L.

CARACal (Containerized Automated Radio Astronomy Calibration, formerly MeerKATHI) reduces radio-interferometric data. Developed originally as an end-to-end continuum- and line imaging pipeline for MeerKAT, it can also be used with other radio telescopes. CARACal reduces large data sets and produces high-dynamic-range continuum images and spectroscopic data cubes. The pipeline is platform-independent and delivers imaging quality metrics to efficiently assess the data quality.

[ascl:2006.013]
JoXSZ: Joint X-ray and SZ fitting for galaxy clusters in Python

JoXSZ jointly fits the thermodynamic profiles of galaxy clusters from both SZ and X-ray data using a Markov chain Monte Carlo fitting algorithm. It is an enhanced version of preprofit (ascl:1910.002), which fits only SZ data. JoXSZ parameterizes the pressure and electron density profile of a galaxy cluster with a given center and derives the temperature profile as the ratio of these quantities through the ideal gas law. The X-ray and SZ-based temperatures can be similar or different, which allows study of the cluster elongation along line of sight, gas clumping, or calibration uncertainties.

[ascl:2006.012]
pxf_kin_err: Radial velocity and velocity dispersion uncertainties estimator

pxf_kin_err estimates the radial velocity and velocity dispersion uncertainties based solely on the shape of a template spectrum used in the fitting procedure and signal-to-noise information. This method can be used for exposure time calculators, in the design of observational programs and estimates on expected uncertainties for spectral surveys of galaxies and star clusters, and as an accurate substitute for Monte-Carlo simulations when running them for large samples of thousands of spectra is unfeasible.

[ascl:2006.011]
SERVAL: SpEctrum Radial Velocity AnaLyser

Zechmeister, M.; Reiners, A.; Amado, P. J.; Azzaro, M.; Bauer, F. F.; Béjar, V. J. S.; Caballero, J. A.; Guenther, E. W.; Hagen, H. -J.; Jeffers, S. V.; Kaminski, A.; Kürster, M.; Launhardt, R.; Montes, D.; Morales, J. C.; Quirrenbach, A.; Reffert, S.; Ribas, I.; Seifert, W.; Tal-Or, L. Wolthoff, V.

SERVAL calculates radial velocities (RVs) from stellar spectra. The code uses least-squares fitting algorithms to derive the RVs and additional spectral diagnostics. Forward modeling in pixel space is used to properly weight pixel errors, and the stellar templates are reconstructed from the observations themselves to make optimal use of the RV information inherent in the stellar spectra.

[ascl:2006.010]
PRISim: Precision Radio Interferometer Simulator

PRISim is a modular radio interferometer array simulator, including the radio sky and instrumental effects, and generates a transit dataset in HD5 format.

[ascl:2006.009]
AxionNS: Ray-tracing in neutron stars

AxionNS computes radio light curves resulting from the resonant conversion of Axion dark matter into photons within the magnetosphere of a neutron star. Photon trajectories are traced from the observer to the magnetosphere where a root finding algorithm identifies the regions of resonant conversion. Given the modeling of the axion dark matter distribution and conversion probability, one can compute the photon flux emitted from these regions. The individual contributions from all the trajectories is then summed to obtain the radiated photon power per unit solid angle.

[ascl:2006.008]
DeepSphere: Graph-based spherical convolutional neural network for cosmology

DeepSphere implements a generalization of Convolutional Neural Networks (CNNs) to the sphere. It models the discretized sphere as a graph of connected pixels. The resulting convolution is more efficient (especially when data doesn't span the whole sphere) and mostly equivariant to rotation (small distortions are due to the non-existence of a regular sampling of the sphere). The pooling strategy exploits a hierarchical pixelization of the sphere (HEALPix) to analyze the data at multiple scales. The graph neural network model is based on ChebNet and its TensorFlow implementation.

[ascl:2006.007]
TATTER: Two-sAmple TesT EstimatoR

TATTER (Two-sAmple TesT EstimatoR) performs two-sample hypothesis test. The two-sample hypothesis test is concerned with whether distributions p(x) and q(x) are different on the basis of finite samples drawn from each of them. This ubiquitous problem appears in a legion of applications, ranging from data mining to data analysis and inference. This implementation can perform the Kolmogorov-Smirnov test (for one-dimensional data only), Kullback-Leibler divergence, and Maximum Mean Discrepancy (MMD) test. The module performs a bootstrap algorithm to estimate the null distribution and compute p-value.

[ascl:2006.006]
CosmoLike: Cosmological Likelihood analyses

CosmoLike analyzes cosmological data sets and forecasts future missions. It has been used in the analysis of the Dark Energy Survey and to optimize the Large Synoptic Survey Telescope and the Wide-Field Infrared Survey Telescope, and is useful for innovative theory projects that test new concepts and methods to enhance the constraining power of cosmological analyses.

[ascl:2006.005]
CosmoCov: Configuration space covariances for projected galaxy 2-point statistics

CosmoCov computes configuration space covariances for projected galaxy 2-point statistics based on the CosmoLike (ascl:2006.006) framework. The package provides a flat sky covariance module, computed with the 2D-FFTLog (ascl:2006.004) algorithm, and a curved sky covariance module.

[ascl:2006.004]
2D-FFTLog: Generalized FFTLog algorithm for non-Gaussian covariance matrices

2D-FFTLog takes the FFTLog algorithm for 1D Hankel transforms and generalizes it for 2D Hankel transforms. The algorithm is useful for efficiently computing non-Gaussian covariance matrices of cosmological 2-point statistics in configuration space from Fourier space covariances. Fast bin-averaging method is also developed for both the logarithmic binning and general binning choices. C and Python versions of the code are available.

[ascl:2006.003]
KinMS: Three-dimensional kinematic modeling of arbitrary gas distributions

The KinMS (KINematic Molecular Simulation) package simulates observations of arbitrary molecular/atomic cold gas distributions from interferometers and line observations from integral field units. This modeling tool is optimized for situations where one has analytic forms for *e.g.* the rotation curve and/or surface brightness profiles (and may want to fit the parameters of these parametric models). It can, however, also be used as a tilted-ring modelling code. The routines are flexible and have been used in various different applications, including investigating the kinematics of molecular gas in early-type galaxies and determining supermassive black-hole masses from CO interferometric observations. They are also useful for creating mock observations from hydrodynamic simulations, and input data-cubes for further simulation in, for example, CASA's (ascl:1107.013) sim_observe tool. Interactive Data Language (IDL) and Python versions of the code are available.

[ascl:2006.002]
PRIISM: Python module for Radio Interferometry Imaging with Sparse Modeling

PRIISM images radio interferometry data using the sparse modeling technique. In addition to generating an image, PRIISM can choose the best image from a range of processing parameters using cross validation. User can obtain statistically optimal images by providing the visibility data with some configuration parameters. The software is implemented as a Python module.

[ascl:2006.001]
HEARSAY: Simulations for the probability of alien contact

HEARSAY computes simulations of the causal contacts between emitters in the Galaxy. It implements the Stochastic Constrained Causal Contact Network (SC3Net) model and explores the parameter space of the model for the emergence of communicating nodes through Monte Carlo simulations and analyzes their causal connections. This model for the abundance and duration of civilizations is based on minimal assumptions and three free parameters, with focus on the statistical properties of empirical models instead of an interpretable model with variables to be determined by observation.

[ascl:2005.020]
HIPSTER: HIgh-k Power Spectrum EstimatoR

HIPSTER (HIgh-k Power Spectrum EstimatoR) computes small-scale power spectra and isotropic bispectra for cosmological simulations and galaxy surveys of arbitrary shape. The code computes the Legendre multipoles of the power spectrum, *P _{ℓ}(k)*, or bispectrum

[ascl:2005.019]
MCRaT: Monte Carlo Radiation Transfer

MCRaT (Monte Carlo Radiation Transfer) analyzes the radiation signature expected from astrophysical outflows. MCRaT injects photons in a FLASH (ascl:1010.082) simulation and individually propagates and compton scatters the photons through the fluid until the end of the simulation. This process of injection and propagating occurs for a user specified number of times until there are no more photons to be injected. Users can then construct light curves and spectra with the MCRaT calculated results. The hydrodynamic simulations used with this version of MCRaT must be in 2D; however, the photon propagation and scattering is done in 3D by assuming cylindrical symmetry. Additionally, MCRaT uses the full Klein–Nishina cross section including the effects of polarization, which can be fully simulated in the code. MCRaT works with FLASH hydrodynamic simulations and PLUTO (ascl:1010.045) AMR simulations, with both 2D spherical (r, equation) and 2D cartesian ((x,y) and (r,z)).

[ascl:2005.018]
RFCDE: Random Forests for Conditional Density Estimation

RFCDE provides an implementation of random forests designed for conditional density estimation. It computes a kernel density estimate of y with nearest neighbor weightings defined by the location of the evaluation point x relative to the leaves in the random forest.

[ascl:2005.017]
cdetools: Tools for Conditional Density Estimates

cdetools provides tools for evaluating conditional density estimates and has applications to photometric redshift estimation and likelihood-free cosmological inference. Available in R and Python, it provides functions for computing a so-called CDE loss function for tuning and assessing the quality of individual probability density functions (PDFs) and diagnostic functions that probe the population-level performance of the PDFs.

[ascl:2005.016]
RAPP: Robust Automated Photometry Pipeline

RAPP is a robust automated photometry pipeline for blurred images. RAPP requires that the observed images contain at least three stars and applies bias, dark, and flat field correction on blurred observational raw data; it also uses the median of adjacent pixels to eliminate outliers. It also uses star enhancement and robust image matching, extracts stars, and performs aperture photometry to extract information from blurred images.

Previous123456789101112131415161718192021222324252627**28**293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273Next

Would you like to view a random code?